RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.

RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431

For more information contact:
Brian Seelkoke
(775) 329-1067

RSD is hosting an advanced refrigeration training seminar with Heatcraft. The course provides fundamental knowledge of low temp refrigeration, proper system service, and more in-depth system troubleshooting procedures. It will focus on components like compressors, condensers, evaporators, and metering devices, along with their functions within the refrigeration cycle.

RSD Phoenix North
602 W. Lone Cactus Drive
Phoenix, AZ 85027

For more information contact:
Uriah Preston
(602) 404-2699

Introduction to low GWP refrigerants. Properties of R454B, R454B vs. R410A Comparisons. Proper installation and service guidelines. Refrigerant Safety. Product Transition Schedule and sell-throughs. And more!

RSD Denver
4800 Osage St. Suite 800
Denver, CO 80221

For more information contact:
Jacob Roose
(303) 568-5300

RSD is hosting an Airflow trouble shooting class. We will discuss the basics of diagnosing airflow issues and perform hands on measurements using some of the basic tools used to measure airflow. Technicians will walk away with a better understanding on how to measure static pressure and gain the ability to use the tools to take the measurements correctly.

RSD Roseville
640 Commerce Dr.
Roseville, CA 95678

For more information contact:
Chad McAfee
(916) 780-7220

RSD is hosting an Airflow trouble shooting class. We will discuss the basics of diagnosing airflow issues and perform hands on measurements using some of the basic tools used to measure airflow. Technicians will walk away with a better understanding on how to measure static pressure and gain the ability to use the tools to take the measurements correctly.

RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827

For more information contact:
Dmitriy Shalko
(916) 369-0203
dshalko@rsd.net

RSD is hosting an advanced refrigeration training seminar with Heatcraft. The course provides fundamental knowledge of low temp refrigeration, proper system service, and more in-depth system troubleshooting procedures. It will focus on components like compressors, condensers, evaporators, and metering devices, along with their functions within the refrigeration cycle.

RSD Tucson
303 S. Kino Pkwy
Tucson, AZ 85719

For more information contact:
Dee Gunnels
(520) 623-5887

RSD is hosting an HTPG Intro to Medium and Low Temperature Refrigeration training. This course will cover vapor compression refrigeration cycle, specifically the efficient cooling system. It will also go over the Four Basic Components Roles: Compressor, Condenser, Expansion Valve/Device, and Evaporator. In addition a review understanding superheat, sub-cooling, and saturation.

RSD Boise
423 N. Mitchell St.
Boise, ID 83704

For more information contact:
Anthony Ramirez
(208) 378-9940

This will go over Title 24 Heat Pump Transition, importance of Airflow, new A2L Components, Ruud Technical Specialist on-site for questions, San Diego County Ultra Low-Nox requirement effective May 14th, 2025

RSD San Diego Kearny Mesa
7332 Convoy Ct. Unit A
San Diego, CA 92111

For more information contact:
Juan Espadas
(858) 565-7191

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Corona
117 Via Trevizio
Corona, CA 92879

For more information contact:
Jeremy Hatfield
(951) 893-9215

RSD is hosting an aftermarket PSC/ECM motor class. The course will provide a basic understanding of ECM motors and how they operate. It will offer a better understanding of the difference between PSC versus ECM motors. Topics on how to replace a PSC motor with an ECM motor, as well as an OEM motor with an aftermarket ECM for half the price will also be covered.

RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431

For more information contact:
Brian Seelkoke
(775) 329-1067

Introduction to low GWP refrigerants. Properties of R454B, R454B vs. R410A Comparisons. Proper installation and service guidelines. Refrigerant Safety. Product Transition Schedule and sell-throughs. And more!

RSD Centennial
7184 S. Revere Pkwy Bldg. 2
Centennial, CO 80112

For more information contact:
Zach Boettcher
(303) 792-2354

RSD is hosting an advanced refrigeration training seminar with Heatcraft. The course provides fundamental knowledge of low temp refrigeration, proper system service, and more in-depth system troubleshooting procedures. It will focus on components like compressors, condensers, evaporators, and metering devices, along with their functions within the refrigeration cycle.

RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233

For more information contact:
Dan Weaver
(480) 969-9988

This will go over Title 24 Heat Pump Transition, importance of Airflow, new A2L Components, Ruud Technical Specialist on-site for questions

RSD Thousand Palms
30571 Front St.
Thousand Palms, CA 92276

For more information contact:
Luis Gonzalez
(760) 343-1600

RSD is hosting an RSD Counter Day event. Here you will learn about welding micro-channel coils, how to braze repair in a live working environment, and make repairs on small surfaces with a delicate touch. This is an opportunity to have any questions you may have answered about micro channel welding and observe a hands-on demonstration.

RSD Concord
2551 Stanwell Dr. Suite A
Concord, CA 94520

For more information contact:
Rodney McClelland
(925) 674-1166
rmcclelland@rsd.net

RSD is hosting an Airflow trouble shooting class. We will discuss the basics of diagnosing airflow issues and perform hands on measurements using some of the basic tools used to measure airflow. Technicians will walk away with a better understanding on how to measure static pressure and gain the ability to use the tools to take the measurements correctly.

RSD Concord
2551 Stanwell Dr. Suite A
Concord, CA 94520

For more information contact:
Rodney McClelland
(925) 674-1166
rmcclelland@rsd.net

This will go over Title 24 Heat Pump Transition, importance of Airflow, new A2L Components, Ruud Technical Specialist on-site for questions

RSD El Centro
110 E. Main St.
El Centro, CA 92243

For more information contact:
David Mayorquin
(760) 352-6971

RSD is hosting a refrigeration and installation basics seminar with Heatcraft. This course introduces participants to the basic science of heat transfers as it relates to the refrigeration cycle. The fit and function of all major sealed system components will be discussed which includes the part each component plays in the transfer of heat. The second half focuses on best installation practices for installing and setting up a walk-in cooler and freezer.

RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431

For more information contact:
Brian Seelkoke
(775) 329-1067

RSD is hosting a Vacuum Pump Maintenance Training with J/B . The is an in-depth session on proper techniques for pulling a vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last and achieve peak performance. This training will go over live breakdowns of Vacuum Pump components, how it works, and recognize the importance of changing your vacuum pump oil after every use.

RSD Ontario
1705 E. Francis St.
Ontario, CA 91761

For more information contact:
Julio Felix
(909) 930-5552

RSD is hosting a refrigeration and installation basics seminar with Heatcraft. This course introduces participants to the basic science of heat transfers as it relates to the refrigeration cycle. The fit and function of all major sealed system components will be discussed which includes the part each component plays in the transfer of heat. The second half focuses on best installation practices for installing and setting up a walk-in cooler and freezer.

RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827

For more information contact:
Dima Shalko
(916) 369-0203
dshalko@rsd.net

RSD is hosting a refrigeration and installation basics seminar with Heatcraft. This course introduces participants to the basic science of heat transfers as it relates to the refrigeration cycle. The fit and function of all major sealed system components will be discussed which includes the part each component plays in the transfer of heat. The second half focuses on best installation practices for installing and setting up a walk-in cooler and freezer.

RSD Total Control Livermore
191 Wright Brothers Ave.
Livermore, CA 94551

For more information contact:
Lisa Vegas
(925) 371-0955
lvegas@rsd.net

This is an Authorized Tridium Training Partner class. The goal of the 5-day, Niagara 4 Technical Certification Program is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement testifying to their ability. Class size limited to 12 to improve the learning experience. No laptop or software needed as all hardware and software required for this certification class will be provided.

Register for this class

RSD is hosting a hands-on compressor teardown training class with CMP. The course will cover series 06D, 06E, and 5H compressors. It will offer tips on troubleshooting a compressor to determine the proper operation. In addition, it will also walk through some discussions over the importance of a strong PM program.

RSD Peoria
8952 W. Bloomfield Rd.
Peoria, AZ 85381

For more information contact:
John Myers
(623) 412-2189

RSD is hosting an introduction to Pelican Wireless Thermostats and Wireless Controls training. The course provides an overview of the Pelican Zone Controllers. You will learn how to setup gateway, as well as program thermostats, shared schedules, and holidays. This training will show how this exciting new product can expand your sales in commercial building comfort solutions.

RSD Boise
423 N. Mitchell St.
Boise, ID 83704

For more information contact:
Anthony Ramirez
(208) 378-9940

RSD is hosting a hands-on compressor teardown training class with CMP. The course will cover series 06D, 06E, and 5H compressors. It will offer tips on troubleshooting a compressor to determine the proper operation. In addition, it will also walk through some discussions over the importance of a strong PM program.

RSD Tucson
303 S. Kino Pkwy
Tucson, AZ 85719

For more information contact:
Dee Gunnels
(520) 623-5887

RSD is hosting a hands-on compressor teardown training class with CMP. The course will cover series 06D, 06E, and 5H compressors. It will offer tips on troubleshooting a compressor to determine the proper operation. In addition, it will also walk through some discussions over the importance of a strong PM program.

RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233

For more information contact:
Dan Weaver
(480) 969-9988

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.

RSD Phoenix North
602 W. Lone Cactus Drive
Phoenix, AZ 85027

For more information contact:
Uriah Preston
(602) 404-2699

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Riverside
4131 Latham St.
Riverside, CA 92501

For more information contact:
Jesus Valencia
(951) 684-8110

RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.

RSD Tucson
303 S. Kino Pkwy
Tucson, AZ 85719

For more information contact:
Dee Gunnels
(520) 623-5887

RSD is hosting an Evap Cooler Installation and Troubleshooting class with Breezair. In this training course, you will learn about the advanced technology of Breezair Evap Cooler Units: including installation, application, troubleshooting, and cooler discharge air temperatures. This is an opportunity to have the training that will benefit you in the approaching summer months.

RSD Boise
423 N. Mitchell St.
Boise, ID 83704

For more information contact:
Anthony Ramirez
(208) 378-9940

RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.

RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233

For more information contact:
Dan Weaver
(480) 969-9988

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

RSD is hosting a fundamentals of refrigeration knowledge seminar with Heatcraft. The course provides an overview on the basics of refrigeration principles and problem solving. It will offer a better understanding of the refrigeration cycle, sub-cooling, thermodynamics, superheat and its importance.

RSD Monterey Park
1201 Monterey Pass Rd.
Monterey Park, CA 91754

For more information contact:
Miguel Perez
(323) 264-2800

RSD is hosting an introduction to brazing course with Harris. This will be a hands-on training on aluminum-to-aluminum brazing and copper-to-copper brazing. Here you will learn about Harris’ latest innovations, including how they work and where you can find success with each product. There will be a quick demo on the ALUXCOR zinc-aluminum brazing alloy about its non-corrosive and non-hygroscopic cesium flux with a lower melting temperature and wider melting range than aluminum silicon alloys.

RSD El Centro
110 E. Main St.
El Centro, CA 92243

For more information contact:
David Mayorquin
(760) 352-6971

RSD is hosting a Belimo Pressure Independent Systems and Valves technical training. Here you will learn about two types of PI valves, Mechanical and Electronic. This will go over how smart valves optimize performance by addressing "Low-Delta T" syndrome, make remote/continuous commissioning possible, and provide on-board trending for operational analysis. The course will discuss the difference between PI and PD valves. It will also offer a better understanding of what (POE) Power Over Ethernet is and what a "Coil Curve" can tell about coil performance.

Beeb's Sports Bar & Grill: 915 Clubhouse Dr.
Livermore, CA 94551

For more information contact:
Drew Ginn
(408) 441-1811
dmginn@rsd.net

This class is designed for experienced Metasys or Facility Explorer technicians on how to optimize standard system control strategies for JCI BACnet field controllers. Learn how to optimize standard system control strategies, modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control. Class size limited to 8 to improve the learning experience.

Register for this class

RSD is hosting a 101 class on Belimo valves and actuators. This will give a better understanding of control types and which applications to use. Here you will learn about basic troubleshooting, select control signals, mount and wire both fail safe and non-fail safe actuators, sizing based on damper torque requirements, and the difference between fail safe and non-fail safe actuators. You will also learn the key differences on 2, 3, & 6-way valves, how to size a damper, and how to mount and wire spring and non-spring return actuators.

RSD Boise
423 N. Mitchell St.
Boise, ID 83704

For more information contact:
Anthony Ramirez
(208) 378-9940

RSD is hosting an introduction to Bosch Inverter Heat Pumps class. It will provide an in-depth training recommended for service and sale technicians. This will discuss the product offering, the do's and don'ts on installation, as well as troubleshooting the product. There will be a live running unit for demonstration.

RSD Boise
423 N. Mitchell St.
Boise, ID 83704

For more information contact:
Anthony Ramirez
(208) 378-9940

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827

For more information contact:
Tom Hardy
(916) 369-0203
thardy@rsd.net

Intensive 2-day (HCCT) Heatcraft Certified Contractor Training course to educate in the latest technologies and commercial strategies to an advanced level of expertise. Contractors will learn hands-on to efficiently optimize and troubleshoot cutting edge controls. The program also provides access to a treasure trove of information, knowledge, and commercial benefits designed to build and expand your business horizons.

RSD Tucson
303 S. Kino Pkwy
Tucson, AZ 85719

For more information contact:
Dee Gunnels
(520) 623-5887

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827

For more information contact:
Tom Hardy
(916) 369-0203
thardy@rsd.net

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827

For more information contact:
Tom Hardy
(916) 369-0203
thardy@rsd.net

Intensive 2-day (HCCT) Heatcraft Certified Contractor Training course to educate in the latest technologies and commercial strategies to an advanced level of expertise. Contractors will learn hands-on to efficiently optimize and troubleshoot cutting edge controls. The program also provides access to a treasure trove of information, knowledge, and commercial benefits designed to build and expand your business horizons.

RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233

For more information contact:
Dan Weaver
(480) 969-9988

This class is designed for experienced Metasys or Facility Explorer technicians on how to optimize standard system control strategies for JCI BACnet field controllers. Learn how to optimize standard system control strategies, modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control. Class size limited to 8 to improve the learning experience.

Register for this class

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Billings
20 Moore Lane
Billings, MT 59101

For more information contact:
Cary Focht
(406) 259-0300

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

Mainstay Suites: 520 Country Club Blvd
Great Falls, MT 59404

For more information contact:
Theodore Van Tighem
(406) 727-9080

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

Courtyard Bozeman: 2168 Boot Hill Court
Billings, MT 59715

For more information contact:
Cary Focht
(406) 259-0300

This class is designed for experienced Metasys or Facility Explorer technicians on how to optimize standard system control strategies for JCI BACnet field controllers. Learn how to optimize standard system control strategies, modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control. Class size limited to 8 to improve the learning experience.

Register for this class

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Total Control Livermore
191 Wright Brothers Ave.
Livermore, CA 94551

For more information contact:
Drew Ginn
(408) 441-1811
dmginn@rsd.net

Intensive 3-day training course to educate experienced Metasys or Facility Explorer technicians to an advanced level of expertise. Students will learn to efficiently optimize standard system control strategies for JCI BACnet field controllers, including modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control.

RSD Peoria
8952 W. Bloomfield Rd.
Peoria, AZ 85381

For more information contact:
Greg Kobrak
(949) 301-4483
gkobrak@rsdtc.com

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Total Control Livermore
191 Wright Brothers Ave.
Livermore, CA 94551

For more information contact:
Drew Ginn
(408) 441-1811
dmginn@rsd.net

RSD is hosting a Nu-Calgon Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. You will also have the opportunity to learn about the differences between various coil cleaners and when to use each cleaner. Features and benefits of the Gallo-Gun and accessories. This is an opportunity to have any questions you may have answered about Nu-Calgon products.

RSD Ontario
1705 E. Francis St.
Ontario, CA 91761

For more information contact:
Julio Felix
(909) 930-5552